It is a Martin
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| JB Weld for top crack repair? http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=53930 |
Page 1 of 1 |
| Author: | jfmckenna [ Fri Feb 05, 2021 3:57 pm ] |
| Post subject: | JB Weld for top crack repair? |
Sigh... And I mean if you are going to use it you really need a better plan on how to clean up. |
|
| Author: | gxs [ Fri Feb 05, 2021 5:38 pm ] |
| Post subject: | Re: JB Weld for top crack repair? |
[Sadness] |
|
| Author: | Chris Pile [ Fri Feb 05, 2021 6:05 pm ] |
| Post subject: | Re: JB Weld for top crack repair? |
YE GODS. Hope that's not a Martin. |
|
| Author: | Skarsaune [ Fri Feb 05, 2021 9:46 pm ] |
| Post subject: | Re: JB Weld for top crack repair? |
Holy Wow. |
|
| Author: | DanKirkland [ Fri Feb 05, 2021 10:18 pm ] |
| Post subject: | Re: JB Weld for top crack repair? |
"A bottle a' JB and paint, makes me the loofier I ain't" |
|
| Author: | jfmckenna [ Sat Feb 06, 2021 12:38 pm ] |
| Post subject: | Re: JB Weld for top crack repair? |
It is a Martin
|
|
| Author: | Chris Pile [ Sat Feb 06, 2021 3:37 pm ] |
| Post subject: | Re: JB Weld for top crack repair? |
Poor thing. I hope whoever did it smokes an extra turd in hell for such sacrilege. |
|
| Author: | SteveSmith [ Sun Feb 07, 2021 5:23 am ] |
| Post subject: | Re: JB Weld for top crack repair? |
Bad enough to use it on the Crack but did they have to slather it all over the top too? Sheesh Sent from my SM-G970U using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|